Liquid epoxy primer coating

Liquid Epoxy Primer coating description

Two-part solvent-free liquid epoxy co coating is coated on the surface of metal pipe before installing heat-shrinkable sleeves (tubes). The epoxy coating is solvent-free and can cure at room temperature. 
After curing, the coating surface is flat and smooth. The products are contained in the metallic can and bear operation tools.

Liquid Epoxy Coatings covered

Epoxy Primer,High Temperature Epoxy Primer,Field-Applied Coatings Materials

Liquid epoxy primer coating Features:

Excellent cathodic disbonding resistance.
Easy to apply.
Fast curing.
It is an epoxy primer coating for shrink sleeve systems. By use in combination with our shrink sleeves, a high performing three layer structure similar to three-layer mill coatings is obtained.
Supplied as ready-to-use EP-Kit (two chamber application bag with applicator sponge) or as bulk material.
An optional Application-Kit (with applicator sponge, mixing cup, stirring stick, and protective gloves) and Dosing Pumps can be obtained.

Safety Instruction :

Before and during use, pay attention to all safety labels on the packaging container, consult the Safety Technical Instructions, 
and follow all local or national safety regulations. Harmful or fatal if swallowed; if swallowed, seek immediate medical assistance. If possible, avoid inhalation of solvent vapors or paint mist, and contact of paint with skin and eyes. Use only in well ventilated areas. When using paint in confined spaces or where air is stagnant, make sure there is adequate forced ventilation.