2mmX15mmX20m Double-sided sealing butyl tape

Double Sided Adhesive Butyl Sealing Tape Description:

Double sided butyl sealing tape is never-curing butyl tape based on butyl rubber as main raw material matched with other additives through advanced technology. It can stick to all kinds of material surface at a strong cohesive force, meanwhile it has excellent weather resistance, aging resistance and waterproof performance. It can make effects of sealing, shock absorption, protection. The product is one kind of extremely advanced waterproof sealing material with no solvent, no shrink, no poisonous gas, never cured, and has the extremely good tracing property to the object surface under conditions of heat expansion cold contraction and the mechanical deformation.

Double Sided Adhesive Butyl Sealing Tapefeatures:

1. High bond strength and high tensile strength, good elasticity, good elongation performance, strong adaptability to base condition changes and cracking, and excellent tracing ability to the shape changes of the substance.

2. Excellent chemical resistance, weather fastness and corrosion resistance.

3. Excellent adhesion, water resistance, sealing, high and low temperature resistance, high stability in sizes.

4. The material is environment-friendly, non-toxic and tasteless, and the construction operation is simple.

Double Sided Adhesive Butyl Sealing Tape Application Field:

1. Waterproofing of the newly built buildings, underground, waterproofing treatment of structural construction joints and sealing of polymer waterproofing rolls

2. Sealing and waterproofing treatment of subway tunnel structure construction joints in municipal engineering

3. Airtight, waterproof and shock absorption treatment for the joints of color steel plate and sunshine house engineering

4. Bonding and sealing treatment for steel structure construction Sealing in automobile assembly

Pipe Repair Materia lcovered Repair Patch,Melt Stick,Mastic Tape,Grease Tape,Butyl Rubber Tape

Application instruction:

Step 1: Clean up

Before the construction, the surface of the base must be cleaned or wiped clean, and keep dry without water,floating soil or oil.

Step 2: Tear off

Tear off the release film on the back of the butyl tape and paste it on the gap.

Step 3: Paste on

After the butyl tape is pasted, the overlapped part shall be pasted on the tape and compact, so that the butyl tape can fully bond with the base layer on both sides.