Heat Shrinkable Opened Sleeves Heavy Duty

Heat Shrinkable Opened Sleeves Heavy Duty

Excellent multi-functional adhesive that allows lower installation in pre-heat temperature and bonding to 3LPE/DFBE/FBE/CTE

Full resistance to shear forces induced by soil and thermal movements.

Superior cathodic disbondment, hot water immersion resistance and Thermal ageing resistance that offers the optimum barrier long term protection against corrosion.

Reduction in time and cost by lower pre-heat temperature, wet Epoxy Primer application.

Excellent resistance to cathodic disbandment.

Forever Cross Linked Heat Shrinkable Sleeves is a radiation cross linked sleeve designed for corrosion protection of straight pipes, fittings, bends, elbows and other irregular configurations. 

When heated the backing layer shrinks and the adhesive flows and forms a reliable corrosion protection seal onto metal and adjacent coating surfaces.

The epoxy primer( Base +Cure)  should applied to the prepared pipe surface then Heat Shrink Sleeve is immediately wrapped around the joint over the wet epoxy primer.

Heat Shrinkable Opened Sleeves Heavy Duty Composition

Forever Cross Linked Heat Shrinkable Sleeves consists of three layers, Epoxy primer layer, adhesive layer, film backing.

Epoxy Primer： Liquid epoxy,  solvent free two component.

Adhesive: High shear strength co-polymer adhesive

Film backing: Radiation cross linked. High density polyethylene 

Heat Shrinkable Opened Sleeves Heavy Duty Features

Excellent resistance to cathodic disbandment.  

Long term corrosion protection.

Non hardening and non cracking.

Mechanical protection and moisture resistance. 

Excellent chemical resistance

Excellent resistance to shear forces

Fast application and high performance.

Heat Shrinkable Opened Sleeves Heavy Duty Properties