SICHUAN FOREVER RADIATION TECHNOLOGY CO.,LTD
$1-200 /Roll
| Payment Type: | L/C,T/T |
| Incoterm: | FOB,CFR,CIF,EXW,FCA,CPT,CIP,Express Delivery |
| Min. Order: | 1 Roll |
| Transportation: | Ocean,Land,Air,Express |
| Port: | Shanghai,Shenzhen,Qingdao |
Place Of Origin: China
Plastic Molding Process Type: Extruding
Processing Service: Moulding
Color: Black
Thickness Range: 1.4 mm to 3.3 mm
Width Range: 300 mm to 800 mm
Length Range: 0.5 m to 30 m
| Selling Units | : | Roll |
| Package Type | : | Carton |
| Picture Example | : |
|
| Download | : |
|
Heat Shrink Wrap Around Sleeves consists low pre-heated special rubber adhesive and thick-wall irradiated cross linked polyolefin. When heated the backing layer shrinks and the adhesive flows and forms a reliable corrosion protection seal onto metal and adjacent coating surfaces.It installed by wrapping the tape on the pipe joints ,fittings ,bends ,elbows etc .After the shrinking of the tape ,the closure patch should be installed onto the overlap of the tape. it suitable for pipe operating temperature, 60 ℃，80 ℃ and more high temperature.This heat shrinkable materials have other products too, such as 3 LPE Heat Shrink Sleeves, 2 PE Heat Shrink Tape, 3 LPP wrap around sleeve, HDD Heat Shrink Wrap Sleeves , Shrinkable Tape Closure Patch and so on.
Features:
Excellent resistance to cathodic disbondment.
Long term corrosion protection.
Non hardening and non cracking.
Fast application and high performance.
Excellent chemical resistance
Excellent resistance to shear forces
Mechanical protection and moisture resistance.
| Item | Typical Value | Typical Value | Test Method | |
|
| HST 60 | HST 80 | - | |
| Operating Temperature | Up to 60℃ | Up to 80℃ | - | |
| Backing |
|
|
| |
| Tensile Strength | 23.20 MPA | 23.50 MPA | ASTM D-638 | |
| Elongation at Break | 650% | 600% | ASTM D-638 | |
| Hardness, Shore D | 50 | 52 | ASTM D-2240 | |
| Dielectric Strength | 32 Kv/mm | 32 Kv/mm | ASTM D-149 | |
| Water Absorption | ＜0.1% | ＜0.1% | ASTM D-570 | |
| Volume Resistivity | 2.5 x 1018 ohm.cm | 2.5 x 1018 ohm.cm | ASTM D-257 | |
| Adhesive |
|
|
| |
| Item | Typical Value | Typical Value | Test Method | |
|
| HST 60 | HST 80 |
| |
| Softening Point | 90℃ | 121℃ | ASTM E-28 | |
| Lap Shear | 2.3MPA @23℃ | 3.5 MPA @23℃ | ISO 21809 | |
| Installed Sleeve |
|
|
| |
| Item | Typical Value | Typical Value | Test Method | |
|
| HST 60 | HST 80 |
| |
| Peel to Steel | 145N/cm@23℃ | 160N/cm@23℃ | ASTM D 1000 | |
| Cathodic Disbondment | ＜15 mm rad@23℃ | ＜15 mm rad@23℃ | DIN EN 12068 | |
| Impact Resistance | ＞ 15 J | ＞ 15 J | DIN EN 12068 | |
| Indentation Resistance | ＞1.0 mm@65℃ | ＞1.0 mm@65℃ | DIN EN 12068 | |
| Thickness Range | 1.5 mm to 2.9 mm | |||
| Width Range | 150 mm to 600 mm | |||
About Us
Related Products List
Contact Us
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now